[rebel-builders] Re: VG Advice

[N.Smith]

Welcome back Bruce :-) and Seasons Greetings!
Nig
"Two Sheds"

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Rick Harper
Sent: 27 December 2006 07:03
To: REBEL FORUM
Subject: [rebel-builders] Re: VG Advice



G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you say
! )

I have a....l....m....o....s...t...... finished rebuilding our REBEL -
after my "less than graceful arrival" about a year & a half back ..... (
also, my dad passed away 6 months ago too - and this STOPPED any work on the
plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff kits
... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need your
help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" / more
substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to spend
tonight & all of tomorrow working on our REBEL ... (so I may not get to see
any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bill Maxwell]

I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you say
! )

I have a....l....m....o....s...t...... finished rebuilding our
REBEL - after my "less than graceful arrival" about a year & a half back
..... ( also, my dad passed away 6 months ago too - and this STOPPED any
work on the plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff kits
... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need your
help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" / more
substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to spend
tonight & all of tomorrow working on our REBEL ... (so I may not get to
see any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Rick Harper]

Thanks Nige !

My work on the plane came to an ABRUPT & very ungraceful stop yesterday ....

I was fitting the new screen - (which I have managed to crack by the way :o( :o( :o( ...... so I'll have to order another one when Greg Gordon orders his fuse' kit soon

I was standing on several stacked milk crates (ours are a molded plastic box - that kinda interlock (sortof)) .... and I went to step back onto the next one & that's the last thing I remember ....

Woke up in a pool of blood & the ambulance arrived shortly thereafter - (thanks to the guy who was inside the plane - holding a spanner, helping me )

6 hours in hospital, lotsa stiches in my head ... and I don't feel real flash at present - the doc says it'll take a week or so to "feel normal" again

Funny aint it !?! .... I manage to bend the plane & don't get so much as a scratch ..... but I end up in hospital while workin on it ! ... Ha !

Happy new year guys 'n' gals !

Biggus .......................... (he's NOT the Messiah - he's a very naughty boy !)
(Rick Harper)
----- Original Message -----
From: N.Smith
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:40 PM
Subject: RE: [rebel-builders] Re: VG Advice


Welcome back Bruce :-) and Seasons Greetings!
Nig
"Two Sheds"

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Rick Harper
Sent: 27 December 2006 07:03
To: REBEL FORUM
Subject: [rebel-builders] Re: VG Advice



G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you say
! )

I have a....l....m....o....s...t...... finished rebuilding our REBEL -
after my "less than graceful arrival" about a year & a half back ..... (
also, my dad passed away 6 months ago too - and this STOPPED any work on the
plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff kits
... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need your
help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" / more
substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to spend
tonight & all of tomorrow working on our REBEL ... (so I may not get to see
any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Rick Harper]

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully soon though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna" in Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you say
! )

I have a....l....m....o....s...t...... finished rebuilding our
REBEL - after my "less than graceful arrival" about a year & a half back
..... ( also, my dad passed away 6 months ago too - and this STOPPED any
work on the plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff kits
... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need your
help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" / more
substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to spend
tonight & all of tomorrow working on our REBEL ... (so I may not get to
see any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[jean.poirier]

As long you don't make damage on your ai

On Fri Dec 29 7:44 , 'Rick Harper' <rjwh@optusnet.com.au> sent:

Thanks Nige !

My work on the plane came to an ABRUPT & very ungraceful stop yesterday ....

I was fitting the new screen - (which I have managed to crack by the way :o( :o( :o( ...... so I'll have to order another one when Greg

Gordon orders his fuse' kit soon

I was standing on several stacked milk crates (ours are a molded plastic box - that kinda interlock (sortof)) .... and I went to step back onto

the next one & that's the last thing I remember ....

Woke up in a pool of blood & the ambulance arrived shortly thereafter - (thanks to the guy who was inside the plane - holding a spanner,

helping me )

6 hours in hospital, lotsa stiches in my head ... and I don't feel real flash at present - the doc says it'll take a week or so to "feel normal" again

Funny aint it !?! .... I manage to bend the plane & don't get so much as a scratch ..... but I end up in hospital while workin on it ! ... Ha !

Happy new year guys 'n' gals !

Biggus .......................... (he's NOT the Messiah - he's a very naughty boy !)
(Rick Harper)
----- Original Message -----
From: N.Smith
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:40 PM
Subject: RE: [rebel-builders] Re: VG Advice


Welcome back Bruce :-) and Seasons Greetings!
Nig
"Two Sheds"

-----Original Message-----
From: mike.davis@dcsol.com [mike.davis@dcsol.com','','','')">mike.davis@dcsol.com]On Behalf Of
Rick Harper
Sent: 27 December 2006 07:03
To: REBEL FORUM
Subject: [rebel-builders] Re: VG Advice



G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you say
! )

I have a....l....m....o....s...t...... finished rebuilding our REBEL -
after my "less than graceful arrival" about a year & a half back ..... (
also, my dad passed away 6 months ago too - and this STOPPED any work on the
plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff kits
... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need your
help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" / more
substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to spend
tonight & all of tomorrow working on our REBEL ... (so I may not get to see
any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[jean.poirier]

As long you didn't make damage to your aircraft in your "chute", evrything else will recovery ! ha ha ha

Take care

Jean
Rebel 747R

On Fri Dec 29 7:44 , 'Rick Harper' <rjwh@optusnet.com.au> sent:

Thanks Nige !

My work on the plane came to an ABRUPT & very ungraceful stop yesterday ....

I was fitting the new screen - (which I have managed to crack by the way :o( :o( :o( ...... so I'll have to order another one when Greg

Gordon orders his fuse' kit soon

I was standing on several stacked milk crates (ours are a molded plastic box - that kinda interlock (sortof)) .... and I went to step back onto

the next one & that's the last thing I remember ....

Woke up in a pool of blood & the ambulance arrived shortly thereafter - (thanks to the guy who was inside the plane - holding a spanner,

helping me )

6 hours in hospital, lotsa stiches in my head ... and I don't feel real flash at present - the doc says it'll take a week or so to "feel normal" again

Funny aint it !?! .... I manage to bend the plane & don't get so much as a scratch ..... but I end up in hospital while workin on it ! ... Ha !

Happy new year guys 'n' gals !

Biggus .......................... (he's NOT the Messiah - he's a very naughty boy !)
(Rick Harper)
----- Original Message -----
From: N.Smith
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:40 PM
Subject: RE: [rebel-builders] Re: VG Advice


Welcome back Bruce :-) and Seasons Greetings!
Nig
"Two Sheds"

-----Original Message-----
From: mike.davis@dcsol.com [mike.davis@dcsol.com','','','')">mike.davis@dcsol.com]On Behalf Of
Rick Harper
Sent: 27 December 2006 07:03
To: REBEL FORUM
Subject: [rebel-builders] Re: VG Advice



G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you say
! )

I have a....l....m....o....s...t...... finished rebuilding our REBEL -
after my "less than graceful arrival" about a year & a half back ..... (
also, my dad passed away 6 months ago too - and this STOPPED any work on the
plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff kits
... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need your
help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" / more
substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to spend
tonight & all of tomorrow working on our REBEL ... (so I may not get to see
any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bill Maxwell]

I'm at S 41 40.19, E 147 15.24 Rick. Nearest landmark, and a common
reporting point, is the Symmons Plains Raceway, which is opposite my
northern paddocks on the Midlands Highway. I'm 30 kms south of Launceston,
on the Highway.

Cheers
Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 29, 2006 11:52 PM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully soon
though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna" in
Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you

say

! )

I have a....l....m....o....s...t...... finished rebuilding our
REBEL - after my "less than graceful arrival" about a year & a half

back

..... ( also, my dad passed away 6 months ago too - and this STOPPED

any

work on the plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff

kits

... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need

your

help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" /

more

substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to

spend

tonight & all of tomorrow working on our REBEL ... (so I may not get to
see any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Rick Harper]

WOW ... my old skipper - (who retired last year) - just moved to Longford ... which is "just down the road a bit " from you I'd imagine !

Wendy & I were there in June for Al's 60th birthday party !!!

Biggus
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 9:48 AM
Subject: Re: [rebel-builders] Re: VG Advice


I'm at S 41 40.19, E 147 15.24 Rick. Nearest landmark, and a common
reporting point, is the Symmons Plains Raceway, which is opposite my
northern paddocks on the Midlands Highway. I'm 30 kms south of Launceston,
on the Highway.

Cheers
Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 29, 2006 11:52 PM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully soon
though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna" in
Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear you

say

! )

I have a....l....m....o....s...t...... finished rebuilding our
REBEL - after my "less than graceful arrival" about a year & a half

back

..... ( also, my dad passed away 6 months ago too - and this STOPPED

any

work on the plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent cuff

kits

... so I made a set of my own - ( with the serious help of an aircraft
designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need

your

help / advice.

Can any of you out there please give me your opinions / findings as to
WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger" /

more

substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to

spend

tonight & all of tomorrow working on our REBEL ... (so I may not get to
see any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bill Maxwell]

Longford is one of my two closest townships. The village of Perth is the
other. Wish I had known you were down here, I haven't seen you and Wendy
since that day VH-REB suffered that engine problem that forced you to leave
Wendy at Holbrook. How long ago was that now - 3years at least, I suspect.

Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 30, 2006 12:09 PM
Subject: Re: [rebel-builders] Re: VG Advice

WOW ... my old skipper - (who retired last year) - just moved to Longford
... which is "just down the road a bit " from you I'd imagine !

Wendy & I were there in June for Al's 60th birthday party !!!

Biggus
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 9:48 AM
Subject: Re: [rebel-builders] Re: VG Advice


I'm at S 41 40.19, E 147 15.24 Rick. Nearest landmark, and a common
reporting point, is the Symmons Plains Raceway, which is opposite my
northern paddocks on the Midlands Highway. I'm 30 kms south of
Launceston,
on the Highway.

Cheers
Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 29, 2006 11:52 PM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully soon
though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna" in
Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear

you

say

! )

I have a....l....m....o....s...t...... finished rebuilding our
REBEL - after my "less than graceful arrival" about a year & a half

back

..... ( also, my dad passed away 6 months ago too - and this STOPPED

any

work on the plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent

cuff

kits

... so I made a set of my own - ( with the serious help of an

aircraft

designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need

your

help / advice.

Can any of you out there please give me your opinions / findings as

to

WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger"

/

more

substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to

spend

tonight & all of tomorrow working on our REBEL ... (so I may not get

to

see any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Rick Harper]

G'day Bill ...

Sorry 'bout the delay in answering ... been busy knocking myself out - literally ..... :o( - (I was working on the Rebel & I fell off a stack of milk crates & split my head open :o( :o( :o(

Getting better ... balance is a bit off when I put my head right up or down though .... no flying until it clears up !!! :o(

----------------------------------------

Just showed Wendy your last write - she says WOW ! ...

Yep, that was about 3 years back - we fitted the "tired" IO-320 Lyc after that (which took 11 months out of the air , all up ! ) ... Flew for a year or so ... then damaged the plane trying to win a landing competition 18 months ago - DUMB, DUMB, DUMB - won't happen again !

Hope to get the Rebel test flown in the next month or so
... will get you some pic's & a flight report then !

Biggus


----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 12:21 PM
Subject: Re: [rebel-builders] Re: VG Advice


Longford is one of my two closest townships. The village of Perth is the
other. Wish I had known you were down here, I haven't seen you and Wendy
since that day VH-REB suffered that engine problem that forced you to leave
Wendy at Holbrook. How long ago was that now - 3years at least, I suspect.

Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 30, 2006 12:09 PM
Subject: Re: [rebel-builders] Re: VG Advice

WOW ... my old skipper - (who retired last year) - just moved to Longford
... which is "just down the road a bit " from you I'd imagine !

Wendy & I were there in June for Al's 60th birthday party !!!

Biggus
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 9:48 AM
Subject: Re: [rebel-builders] Re: VG Advice


I'm at S 41 40.19, E 147 15.24 Rick. Nearest landmark, and a common
reporting point, is the Symmons Plains Raceway, which is opposite my
northern paddocks on the Midlands Highway. I'm 30 kms south of
Launceston,
on the Highway.

Cheers
Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 29, 2006 11:52 PM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully soon
though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna" in
Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

G'day Guys 'n' Gals !!!

Rick Harper here in OZ again ... ( long time no hear - I hear

you

say

! )

I have a....l....m....o....s...t...... finished rebuilding our
REBEL - after my "less than graceful arrival" about a year & a half

back

..... ( also, my dad passed away 6 months ago too - and this STOPPED

any

work on the plane for over 5 months , while I sorted my mum out :o(

I couldn't afford to purchase one of Angus McKenzie's excellent

cuff

kits

... so I made a set of my own - ( with the serious help of an

aircraft

designer friend of mine here in OZ )

I've also bought 2 sets of Vortex Generators - which is why I need

your

help / advice.

Can any of you out there please give me your opinions / findings as

to

WHERE the BEST placement is for VG's on :

The wings
The stabilisers
The Tail / Rudder

PICTURES would be really nice too !!!
Failing that ..... accurate descriptions & measurements ?!?

BTW : I now have a cuff on the leading adge .... slightly "bigger"

/

more

substantial than Angus' design !

Many Thanks Folks !!!

and ALL the BEST for CHRISSY to you ALL from Wendy & I

Rick Harper
"Biggus"

PS : I'm sending THIS e-mail as I literally walk out the door - to

spend

tonight & all of tomorrow working on our REBEL ... (so I may not get

to

see any replies until late Thursday night (my end - "down under")



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bill Maxwell]

Ouch Rick, a not at all pleasant experience. Pleased to hear that things
are on the mend though. Does the Biggus tag have any association with the
fall?

I can appreciate the balance problem. I have had a recurring ear infection
thing over the past 9 months that also has disturbed my balance. Slowed my
hangar construction down considerably but I now need to get it finished
before the winds return with the equinox.

Looking forward to hearing more once you get REB back in the air.

Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Saturday, January 06, 2007 9:13 AM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill ...

Sorry 'bout the delay in answering ... been busy knocking myself out -
literally ..... :o( - (I was working on the Rebel & I fell off a
stack of milk crates & split my head open :o( :o( :o(

Getting better ... balance is a bit off when I put my head right up or
down though .... no flying until it clears up !!! :o(

----------------------------------------

Just showed Wendy your last write - she says WOW ! ...

Yep, that was about 3 years back - we fitted the "tired" IO-320 Lyc after
that (which took 11 months out of the air , all up ! ) ... Flew for a year
or so ... then damaged the plane trying to win a landing competition 18
months ago - DUMB, DUMB, DUMB - won't happen again !

Hope to get the Rebel test flown in the next month or so
... will get you some pic's & a flight report then !

Biggus


----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 12:21 PM
Subject: Re: [rebel-builders] Re: VG Advice


Longford is one of my two closest townships. The village of Perth is the
other. Wish I had known you were down here, I haven't seen you and Wendy
since that day VH-REB suffered that engine problem that forced you to
leave
Wendy at Holbrook. How long ago was that now - 3years at least, I
suspect.

Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 30, 2006 12:09 PM
Subject: Re: [rebel-builders] Re: VG Advice

WOW ... my old skipper - (who retired last year) - just moved to

Longford

... which is "just down the road a bit " from you I'd imagine !

Wendy & I were there in June for Al's 60th birthday party !!!

Biggus
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 9:48 AM
Subject: Re: [rebel-builders] Re: VG Advice


I'm at S 41 40.19, E 147 15.24 Rick. Nearest landmark, and a common
reporting point, is the Symmons Plains Raceway, which is opposite my
northern paddocks on the Midlands Highway. I'm 30 kms south of
Launceston,
on the Highway.

Cheers
Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 29, 2006 11:52 PM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully

soon

though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna"

in

Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

hear

you

say

our

half

back

STOPPED

any

:o(

cuff

kits

aircraft

need

your

as

to

"bigger"

/

more

to

spend

get

to

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[cosmedi]

Hello Rick,
Just back in Sydney after two weeks at the farm. Sorry to hear about your head. Are you sure you fell or did Wendy take to you with something big. I'm your mate so you can tell me the truth; I won't spill my guts!!!! May we all have a second opinion from Wendy??????.Now if it was not Wendy, have you been sniffing those solvents I recently gave you???

Kind regards,
Greg. G



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Rick Harper]

G'day Bill ...
Subject: Re: [rebel-builders] Re: VG Advice


Ouch Rick, a not at all pleasant experience. Pleased to hear that things
are on the mend though. Does the Biggus tag have any association with the
fall ?

Nope ..... I'm LARGE & my name is Richard -(Dick) .... AND being an avid Monty Python fan - most people call me Biggus ... (short for "Biggus Dickus") - I trust you are familiar with the Life of Brian camedy film ?!?!?

I can appreciate the balance problem. I have had a recurring ear infection
thing over the past 9 months that also has disturbed my balance. Slowed my
hangar construction down considerably but I now need to get it finished
before the winds return with the equinox.

Looking forward to hearing more once you get REB back in the air.

No probs ... I started her up today - first time she's run in 18 months WOO WOO WOO !!!
(I just have a single page list of "fiddley things" to sort out _( which will take about a month I reckon :o( ... & then she's ready to rock 'n roll !!!!!!!!!!!!!!!!!!!!!!!!

Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Saturday, January 06, 2007 9:13 AM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill ...

Sorry 'bout the delay in answering ... been busy knocking myself out -
literally ..... :o( - (I was working on the Rebel & I fell off a
stack of milk crates & split my head open :o( :o( :o(

Getting better ... balance is a bit off when I put my head right up or
down though .... no flying until it clears up !!! :o(

----------------------------------------

Just showed Wendy your last write - she says WOW ! ...

Yep, that was about 3 years back - we fitted the "tired" IO-320 Lyc after
that (which took 11 months out of the air , all up ! ) ... Flew for a year
or so ... then damaged the plane trying to win a landing competition 18
months ago - DUMB, DUMB, DUMB - won't happen again !

Hope to get the Rebel test flown in the next month or so
... will get you some pic's & a flight report then !

Biggus


----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 12:21 PM
Subject: Re: [rebel-builders] Re: VG Advice


Longford is one of my two closest townships. The village of Perth is the
other. Wish I had known you were down here, I haven't seen you and Wendy
since that day VH-REB suffered that engine problem that forced you to
leave
Wendy at Holbrook. How long ago was that now - 3years at least, I
suspect.

Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 30, 2006 12:09 PM
Subject: Re: [rebel-builders] Re: VG Advice

WOW ... my old skipper - (who retired last year) - just moved to

Longford

... which is "just down the road a bit " from you I'd imagine !

Wendy & I were there in June for Al's 60th birthday party !!!

Biggus
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Saturday, December 30, 2006 9:48 AM
Subject: Re: [rebel-builders] Re: VG Advice


I'm at S 41 40.19, E 147 15.24 Rick. Nearest landmark, and a common
reporting point, is the Symmons Plains Raceway, which is opposite my
northern paddocks on the Midlands Highway. I'm 30 kms south of
Launceston,
on the Highway.

Cheers
Bill
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 29, 2006 11:52 PM
Subject: Re: [rebel-builders] Re: VG Advice

G'day Bill , ....

Mine is a totally "one off" .... no pic's as yet ... hopefully

soon

though !

Biggus

PS - Had a look on my World Atlas program .... WHERE is "Powranna"

in

Tazy ???
----- Original Message -----
From: Bill Maxwell
To: rebel-builders@dcsol.com
Sent: Wednesday, December 27, 2006 8:34 PM
Subject: Re: [rebel-builders] Re: VG Advice


I would like to know more about your cuff set, Rick. Do you have a
photograph or two?

Bill
753R, Powranna, Tasmania
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: "REBEL FORUM" <rebel-builders@dcsol.com>
Sent: Wednesday, December 27, 2006 6:03 PM
Subject: [rebel-builders] Re: VG Advice

hear

you

say

our

half

back

STOPPED

any

:o(

cuff

kits

aircraft

need

your

as

to

"bigger"

/

more

to

spend

get

to

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------