Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] 4130 wall thickness

Converted from Wildcat! database. (read only)
Locked
Ken

[rebel-builders] 4130 wall thickness

Post by Ken » Sun Feb 19, 2012 10:47 am

3/4 x .058 for most of my soob mount.
.049 would have been adequate but thicker was easier to weld for an amateur.
R. Finch was probably in the ballpark in his book for a V-8 and from
memory I believe he was recommending 1" x .065.
Generally the larger diameter tubes are needed for long tubes in
compression whereas cross bracing and tension tubes may not need to be
so large.
Ken

rickhm@comcast.net wrote:
I am taking a brief survey of those who have built their own engine mount. I'm hoping Mike K. will respond. What size tubing and wall thickness is the majority of engine mounts constructed from? I am building a SR2500 with a V8.

Rick Muller
SR70




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew Dalgleish

[rebel-builders] 4130 wall thickness

Post by Drew Dalgleish » Sun Feb 19, 2012 10:47 am

I am taking a brief survey of those who have built their own engine
mount. I'm hoping Mike K. will respond. What size tubing and wall
thickness is the majority of engine mounts constructed from? I am building
a SR2500 with a V8.
Rick Muller
SR70
.035 for my lycoming mount IIRC it's a pain to weld though.


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Kimball

[rebel-builders] 4130 wall thickness

Post by Mike Kimball » Sun Feb 19, 2012 10:47 am

I used 1 X 0.058 for the entire structure. Be advised that I believe this
to be overkill. I decided to accept a bit more weight for simplicity and
peace of mind. I believe that I could impact the ground in a vertical dive
and the plane and engine would be a total loss but the engine mount would
survive undamaged.

Mike
044SR

P.S. Major milestone. I moved the fuselage out of the shop, put it on its
gear, and towed it to the airport on its own gear with no problems. You can
follow my progress during assembly and taxi testing at
http://mikesr.dcsol.com if you want. I keep adding pics as I progress.

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rickhm@comcast.net
Sent: Monday, May 15, 2006 3:44 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 4130 wall thickness

I am taking a brief survey of those who have built their own engine mount.
I'm hoping Mike K. will respond. What size tubing and wall thickness is the
majority of engine mounts constructed from? I am building a SR2500 with a
V8.

Rick Muller
SR70



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked