Moose: Tail Beef Up

Steve Halvorsen · Post by **Steve Halvorsen** » Sat Feb 18, 2012 2:23 pm

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you look into the mod the Dale Fultz has come up with. You can contact him at: dfultz17086@earthlink.net
It is a very robust and well made add in to the tail and has rubber bushings (ala Cessna)installed into the mounts to take up some of the shock from our great landings. You will need SOME of the parts supplied by MAM to do a correct install and make things easyier. I will try to up load some pic's to the list to show our install. Now that ours is completed, if we have a very bad day the only thing that would be left would be a complete undamaged tail section. We probibly went way over board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when they will be in production of the new stinger. We have found someone who will make the new stingers for a VERY resonable cost encluding heat treating but, they will need an order for 10 units to do the production run to keep the cost down. The cost would be a lot less than what MAM is chargeing for their new stinger ($405.00 US). If anyone would be interested let me know and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Warren & Marg Montgomery · Post by **Warren & Marg Montgomery** » Sat Feb 18, 2012 2:29 pm

Steve,

Keep me posted and pencil me in for one.

Steve Halvorsen wrote:

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you look into the mod the Dale Fultz has come up with. You can contact him at: dfultz17086@earthlink.net
It is a very robust and well made add in to the tail and has rubber bushings (ala Cessna)installed into the mounts to take up some of the shock from our great landings. You will need SOME of the parts supplied by MAM to do a correct install and make things easyier. I will try to up load some pic's to the list to show our install. Now that ours is completed, if we have a very bad day the only thing that would be left would be a complete undamaged tail section. We probibly went way over board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when they will be in production of the new stinger. We have found someone who will make the new stingers for a VERY resonable cost encluding heat treating but, they will need an order for 10 units to do the production run to keep the cost down. The cost would be a lot less than what MAM is chargeing for their new stinger ($405.00 US). If anyone would be interested let me know and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Reed Britt Civ 309 MXSG/M · Post by **Reed Britt Civ 309 MXSG/M** » Sat Feb 18, 2012 2:29 pm

I am interested - Have ordered the initial parts - Britt SR194

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Warren
& Marg Montgomery
Sent: Wednesday, November 30, 2005 3:17 AM
To: rebel-builders@dcsol.com
Subject: Re: Moose: Tail Beef Up

Steve,

Keep me posted and pencil me in for one.

Steve Halvorsen wrote:

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you look

into the mod the Dale Fultz has come up with. You can contact him at:
dfultz17086@earthlink.net

It is a very robust and well made add in to the tail and has rubber

bushings (ala Cessna)installed into the mounts to take up some of the shock
from our great landings. You will need SOME of the parts supplied by MAM to
do a correct install and make things easyier. I will try to up load some
pic's to the list to show our install. Now that ours is completed, if we
have a very bad day the only thing that would be left would be a complete
undamaged tail section. We probibly went way over board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when

they will be in production of the new stinger. We have found someone who
will make the new stingers for a VERY resonable cost encluding heat treating
but, they will need an order for 10 units to do the production run to keep
the cost down. The cost would be a lot less than what MAM is chargeing for
their new stinger ($405.00 US). If anyone would be interested let me know
and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

R J Thomas · Post by **R J Thomas** » Sat Feb 18, 2012 2:29 pm

Steve,

Please add me to the list of interested.

Cheers, rj

R J Thomas
Lafayette, LA

N140SR (reserved) slow build 2500 w/3500 upgades

n140sr@cox-internet.com

----- Original Message -----
From: "Steve Halvorsen" <shalvorsen@sbcglobal.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, November 27, 2005 6:32 PM
Subject: Moose: Tail Beef Up

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you look
into the mod the Dale Fultz has come up with. You can contact him at:
dfultz17086@earthlink.net
It is a very robust and well made add in to the tail and has rubber
bushings (ala Cessna)installed into the mounts to take up some of the
shock from our great landings. You will need SOME of the parts supplied
by MAM to do a correct install and make things easyier. I will try to up
load some pic's to the list to show our install. Now that ours is
completed, if we have a very bad day the only thing that would be left
would be a complete undamaged tail section. We probibly went way over
board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when
they will be in production of the new stinger. We have found someone who
will make the new stingers for a VERY resonable cost encluding heat
treating but, they will need an order for 10 units to do the production
run to keep the cost down. The cost would be a lot less than what MAM is
chargeing for their new stinger ($405.00 US). If anyone would be
interested let me know and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wes & Bobbi Jo Erb · Post by **Wes & Bobbi Jo Erb** » Sat Feb 18, 2012 2:29 pm

Steve,

I could use a stinger as well if they fire up a producton line...
Thanks...

Wes Erb
Moose #208
Chugiak, AK
weserb@hotmail.com

----- Original Message -----
From: "Steve Halvorsen" <shalvorsen@sbcglobal.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, November 27, 2005 6:32 PM
Subject: Moose: Tail Beef Up

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you
look
into the mod the Dale Fultz has come up with. You can contact him at:
dfultz17086@earthlink.net
It is a very robust and well made add in to the tail and has rubber
bushings (ala Cessna)installed into the mounts to take up some of the
shock from our great landings. You will need SOME of the parts supplied
by MAM to do a correct install and make things easyier. I will try to up
load some pic's to the list to show our install. Now that ours is
completed, if we have a very bad day the only thing that would be left
would be a complete undamaged tail section. We probibly went way over
board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when
they will be in production of the new stinger. We have found someone who
will make the new stingers for a VERY resonable cost encluding heat
treating but, they will need an order for 10 units to do the production
run to keep the cost down. The cost would be a lot less than what MAM is
chargeing for their new stinger ($405.00 US). If anyone would be
interested let me know and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Phillip Bohn · Post by **Phillip Bohn** » Sat Feb 18, 2012 2:29 pm

Steve,

Count us in for a new stinger as well.

Phil & Ted
Schaumburg, IL

Wes & Bobbi Jo Erb <lv2hike@gci.net> wrote:
Steve,

I could use a stinger as well if they fire up a producton line...
Thanks...

Wes Erb
Moose #208
Chugiak, AK
weserb@hotmail.com

----- Original Message -----
From: "Steve Halvorsen"
To:
Sent: Sunday, November 27, 2005 6:32 PM
Subject: Moose: Tail Beef Up

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you
look
into the mod the Dale Fultz has come up with. You can contact him at:
dfultz17086@earthlink.net
It is a very robust and well made add in to the tail and has rubber
bushings (ala Cessna)installed into the mounts to take up some of the
shock from our great landings. You will need SOME of the parts supplied
by MAM to do a correct install and make things easyier. I will try to up
load some pic's to the list to show our install. Now that ours is
completed, if we have a very bad day the only thing that would be left
would be a complete undamaged tail section. We probibly went way over
board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when
they will be in production of the new stinger. We have found someone who
will make the new stingers for a VERY resonable cost encluding heat
treating but, they will need an order for 10 units to do the production
run to keep the cost down. The cost would be a lot less than what MAM is
chargeing for their new stinger ($405.00 US). If anyone would be
interested let me know and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rickhm · Post by **rickhm** » Sat Feb 18, 2012 2:29 pm

Count me in as well.

Rick Muller
SR70

-------------- Original message --------------

Steve,

Count us in for a new stinger as well.

Phil & Ted
Schaumburg, IL

Wes & Bobbi Jo Erb wrote:
Steve,

I could use a stinger as well if they fire up a producton line...
Thanks...

Wes Erb
Moose #208
Chugiak, AK
weserb@hotmail.com

----- Original Message -----
From: "Steve Halvorsen"
To:
Sent: Sunday, November 27, 2005 6:32 PM
Subject: Moose: Tail Beef Up

For all of those who are or will be doing a beef up to the Moose tail.

We just completed our beef up on our moose. I would suggest that you
look
into the mod the Dale Fultz has come up with. You can contact him at:
dfultz17086@earthlink.net
It is a very robust and well made add in to the tail and has rubber
bushings (ala Cessna)installed into the mounts to take up some of the
shock from our great landings. You will need SOME of the parts supplied
by MAM to do a correct install and make things easyier. I will try to up
load some pic's to the list to show our install. Now that ours is
completed, if we have a very bad day the only thing that would be left
would be a complete undamaged tail section. We probibly went way over
board on our beef up.

Right now the only hang up is the stinger. MAM does not know if and when
they will be in production of the new stinger. We have found someone who
will make the new stingers for a VERY resonable cost encluding heat
treating but, they will need an order for 10 units to do the production
run to keep the cost down. The cost would be a lot less than what MAM is
chargeing for their new stinger ($405.00 US). If anyone would be
interested let me know and we can work on it.

Steve H
Moose 213

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------