Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Filler neck install/dimpled anchor nuts

Converted from Wildcat! database. (read only)
Locked
Jesse Jenks

Filler neck install/dimpled anchor nuts

Post by Jesse Jenks » Sat Feb 18, 2012 10:58 am

Ben,
I agree, making yourself happy is a big part of this whole thing.

Yes, there are anchor nuts with 3/32 dimpled rivet holes. I have been using
anchor nuts a lot, and bought some with dimpled rivet holes for attaching
the tail tips. They cost me about $1.00 each from a local supplier. When I
started on the wings I got a bunch of un-dimpled ones from ACS for less than
$.25 each. I dimpled some of them myself for the inspection covers which
works OK. For the wing root/fuselage fairings I installed un-dimpled ones in
the root rib by countersinking the root rib (the skin will go on over the
anchor nut rivets). I have been using solid 3/32 CS rivets and a squeezer. I
got a cheap squeezer from ATS that works great.
Jesse


From: bransom@dcsol.com
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Filler neck install
Date: Fri, 26 Aug 2005 08:41:46 -0800

Jesse,
FWIW, I installed mine on the inside. Me and others that stop by to look
at
my plane for the 5 years before it flies will admire the cleaner look. ;)

On another front... is there such a thing as anchor nuts with the 3/32
rivet
holes dimpled or CS?
-Ben/496R
Thanks Walter and Wayne.


From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: Filler neck install
Date: Thu, 25 Aug 2005 23:35:44 -0400

10+ years, 500 hours of fuel fills and just starting to get a bit
loose....but only 'cause the rubber seals have shrunk...but still not
letting any water in.

I've done them both ways and I guess outside makes more sense from the
replacement point of view...look better inside as you say..but also
like
you
say only the guy with the fuel hose in his hand (YOU NEVER LET SOMEONE
DO
IT
FOR YOU) sees them!

Cheers,
Wayne

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, August 25, 2005 10:59 PM
Subject: RE: Filler neck install




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ken

Filler neck install/dimpled anchor nuts

Post by Ken » Sat Feb 18, 2012 10:58 am

B&B aircraft hardware sells all sizes for about the same price as
undimpled rivet hole nutplates.
Ken

Jesse Jenks wrote:
Ben,
I agree, making yourself happy is a big part of this whole thing.

Yes, there are anchor nuts with 3/32 dimpled rivet holes. I have been using
anchor nuts a lot, and bought some with dimpled rivet holes for attaching
the tail tips. They cost me about $1.00 each from a local supplier. When I
started on the wings I got a bunch of un-dimpled ones from ACS for less than
$.25 each. I dimpled some of them myself for the inspection covers which
works OK. For the wing root/fuselage fairings I installed un-dimpled ones in
the root rib by countersinking the root rib (the skin will go on over the
anchor nut rivets). I have been using solid 3/32 CS rivets and a squeezer. I
got a cheap squeezer from ATS that works great.
Jesse





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

bransom

Filler neck install/dimpled anchor nuts

Post by bransom » Sat Feb 18, 2012 10:58 am

Ken,
I've not heard of B&B. Do you have a web address or phone # for them?
-Ben
B&B aircraft hardware sells all sizes for about the same price as
undimpled rivet hole nutplates.
Ken



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ken

Filler neck install/dimpled anchor nuts

Post by Ken » Sat Feb 18, 2012 10:58 am

913-884-5930
B&B Aircraft Supplies in Gardner KS
I have purchased a fair bit off of them at Oshkosh and Sun'n Fun in bags
of about 25 parts.
http://exp-aircraft.com/vendors/pagesVe ... plies.html

I've seen these nutplates on someones web site as well but can't recall
whose it was. Don't know why they are not more common. I mostly use
these nutplates with dimpled rivet holes.

Ken

bransom@dcsol.com wrote:
Ken,
I've not heard of B&B. Do you have a web address or phone # for them?
-Ben


B&B aircraft hardware sells all sizes for about the same price as
undimpled rivet hole nutplates.
Ken




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked