sharpie markers

Jones, Michael · Post by **Jones, Michael** » Sat Feb 18, 2012 10:48 am

hi all

quick tip i have discovered from ad on TV

many times i want to mark a hole or edge to cut or something but the part
was in a confined space and the marker i was using, sharpie, was to long to
get in and so had to mark surface in another way, well now sharp sells mini
sharpie markers, they are less that 1/2 length of regular sharpie, have some
of these already, good to keep several in shop just in case

regards

mike jones#007

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew Dalgleish · Post by **Drew Dalgleish** » Sat Feb 18, 2012 10:51 am

At 08:05 AM 8/11/2005 -0400, you wrote:

hi all

quick tip i have discovered from ad on TV

many times i want to mark a hole or edge to cut or something but the part
was in a confined space and the marker i was using, sharpie, was to long to
get in and so had to mark surface in another way, well now sharp sells mini
sharpie markers, they are less that 1/2 length of regular sharpie, have some
of these already, good to keep several in shop just in case

regards

mike jones#007

Good tip Mike I just bought 2 of these as soon as I saw them at the home
depot check out $0.99 each. They're very sharp too.
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Brian Breathnach · Post by **Brian Breathnach** » Sat Feb 18, 2012 10:51 am

I picked a couple also and then found that the mark is almost impossible to
get off the material. So, just wondering if the mark that cant be got off
might become corrosive over time?
Cheers
Brian 779R
----- Original Message -----
From: "Drew Dalgleish" <drewjan@cabletv.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, August 11, 2005 8:49 PM
Subject: Re: sharpie markers

At 08:05 AM 8/11/2005 -0400, you wrote:
hi all

quick tip i have discovered from ad on TV

many times i want to mark a hole or edge to cut or something but the part
was in a confined space and the marker i was using, sharpie, was to long
to
get in and so had to mark surface in another way, well now sharp sells
mini
sharpie markers, they are less that 1/2 length of regular sharpie, have
some
of these already, good to keep several in shop just in case

regards

mike jones#007

Good tip Mike I just bought 2 of these as soon as I saw them at the home
depot check out $0.99 each. They're very sharp too.
Drew

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

mike.davis · Post by **mike.davis** » Sat Feb 18, 2012 10:51 am

I always found sharpie marks came right off with a little acetone.

Mike

On 8/11/2005 8:55 PM, REBEL-BUILDERS@DCSOL.COM wrote to MIKE DAVIS:
-To: <mike.davis@dcsol.com>

->
-> I picked a couple also and then found that the mark is almost impossible
to
-> get off the material. So, just wondering if the mark that cant be got off
-> might become corrosive over time?
-> Cheers
-> Brian 779R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Bruce Uvanni · Post by **Bruce Uvanni** » Sat Feb 18, 2012 10:51 am

Return Receipt

Your Re: sharpie markers
document:

was Bruce Uvanni/Burlington/IBM
received
by:

at: 08/12/2005 09:20:48

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------