Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Float pump

Converted from Wildcat! database. (read only)
Locked
Walter Klatt

Float pump

Post by Walter Klatt » Sat Feb 18, 2012 10:28 am

Wayne, I vaguely remembered posting about my pump years ago, so
did a search on the archives, and here it is.

Walter

From: WALTER.KLATT@HOME.COM Number: 6583 Private: No
To: MURPHY-REBEL Reference: None Reads: 60
Date: 8/22/2001 6:08 PM Received: No Exported
Subject: RE: Pump for Murphy 1800 pump-outs

Conference: Rebel Builders



I ended up buying a Beckson model 212PC pump, about 12 inches
long, very light, all plastic and can also be used to pump oil or
diesel. I had to add a short plastic tube, similar to what the
pump-outs use, to make it fit the tapered pump-out fitting. Cost
was 24.59 CDN at Steveston Marine in Langley. They have a
website, too, and sell to the U.S.
http://www.stevestonmarine.com/< /A>
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Walter Klatt
Sent: Saturday, April 30, 2005 9:17 PM
To: rebel-builders@dcsol.com
Subject: RE: Float pump out cups on 1800's


Yeah, I thought 3/8 sounded kind of big for the rudders... You
might as well let us know that CT part number when you get a
chance. I'm still using those bungees on the rudders, but they
are probably overdue to be changed.

BTW, shouldn't you be sleeping...

Walter
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Saturday, April 30, 2005 8:48 PM
To: rebel-builders@dcsol.com
Subject: Re: Float pump out cups on 1800's


I know the small bungee is for the water rudder (came
preinstalled as
well)...I throw those away immediately and install a
tension spring. Anyone
that is interested I can supply the CTC part # and how
many coils I cut off
to make it work right. Guess I should add that to the
"snag" list. Those
water rudder bungees don't make half a season before
rotting off.

What came with these and Dennis's prebuilts was 11' of
1/2" bungee cord just
like you get for the main gear on the Rebel. Guess
someone read cord and
threw in bungee instead of some small (rope) cord. I
grabbed some mower
starter cord today that should do the trick. If you
can get the make of the
pump I'll save myself some immediate work and give
these cups a whirl for
this season.

Thanks,
Wayne

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 30, 2005 11:39 PM
Subject: RE: Float pump out cups on 1800's

The small diameter bungee cord was supplied to
spring load the
water rudders. They should have supplied another
thin rope/thread
for the caps. I just did a loop with a knot, and
they've been
good the whole time for me. Like I said, I still
have yet to lose
a single one. I'll be down to my hangar tomorrow, so
hopefully
will remember to check my pump brand.

Walter
don't forget.
yet to lose a
"probono" work on
They cost
especially
Lake St. John
the pain....
MAM cups but
a piece of
MAM would
tomorrow of
shop time, in
boat. All in
-------------------------------------------------------
https://www.dcsol.com/public/code/html-subscribe.htm
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------


-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
---------------------------------------------------------------
--





-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------






-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

Float pump

Post by Wayne G. O'Shea » Sat Feb 18, 2012 10:28 am

THANKS again Walter! Wayne

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, May 01, 2005 10:35 AM
Subject: Float pump

Wayne, I vaguely remembered posting about my pump years ago, so
did a search on the archives, and here it is.

Walter

From: WALTER.KLATT@HOME.COM Number: 6583 Private: No
To: MURPHY-REBEL Reference: None Reads: 60
Date: 8/22/2001 6:08 PM Received: No Exported
Subject: RE: Pump for Murphy 1800 pump-outs

Conference: Rebel Builders



I ended up buying a Beckson model 212PC pump, about 12 inches
long, very light, all plastic and can also be used to pump oil or
diesel. I had to add a short plastic tube, similar to what the
pump-outs use, to make it fit the tapered pump-out fitting. Cost
was 24.59 CDN at Steveston Marine in Langley. They have a
website, too, and sell to the U.S.
http://www.stevestonmarine.com/< /A>
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Walter Klatt
Sent: Saturday, April 30, 2005 9:17 PM
To: rebel-builders@dcsol.com
Subject: RE: Float pump out cups on 1800's


Yeah, I thought 3/8 sounded kind of big for the rudders... You
might as well let us know that CT part number when you get a
chance. I'm still using those bungees on the rudders, but they
are probably overdue to be changed.

BTW, shouldn't you be sleeping...

Walter
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Saturday, April 30, 2005 8:48 PM
To: rebel-builders@dcsol.com
Subject: Re: Float pump out cups on 1800's


I know the small bungee is for the water rudder (came
preinstalled as
well)...I throw those away immediately and install a
tension spring. Anyone
that is interested I can supply the CTC part # and how
many coils I cut off
to make it work right. Guess I should add that to the
"snag" list. Those
water rudder bungees don't make half a season before
rotting off.

What came with these and Dennis's prebuilts was 11' of
1/2" bungee cord just
like you get for the main gear on the Rebel. Guess
someone read cord and
threw in bungee instead of some small (rope) cord. I
grabbed some mower
starter cord today that should do the trick. If you
can get the make of the
pump I'll save myself some immediate work and give
these cups a whirl for
this season.

Thanks,
Wayne

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 30, 2005 11:39 PM
Subject: RE: Float pump out cups on 1800's

spring load the thin rope/thread
they've been
have yet to lose hopefully don't forget. yet to lose a
"probono" work on
They cost
especially
Lake St. John
the pain....
MAM cups but
a piece of
MAM would
tomorrow of
shop time, in
boat. All in
-------------------------------------------------------
https://www.dcsol.com/public/code/html-subscribe.htm
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
----------
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
---------------------------------------------------------------
--





-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------






-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

Float pump

Post by Wayne G. O'Shea » Sat Feb 18, 2012 10:28 am

Resend due to server oops!

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, May 01, 2005 11:59 AM
Subject: Re: Float pump

THANKS again Walter! Wayne

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, May 01, 2005 10:35 AM
Subject: Float pump

Wayne, I vaguely remembered posting about my pump years ago, so
did a search on the archives, and here it is.

Walter

From: WALTER.KLATT@HOME.COM Number: 6583 Private: No
To: MURPHY-REBEL Reference: None Reads: 60
Date: 8/22/2001 6:08 PM Received: No Exported
Subject: RE: Pump for Murphy 1800 pump-outs

Conference: Rebel Builders



I ended up buying a Beckson model 212PC pump, about 12 inches
long, very light, all plastic and can also be used to pump oil or
diesel. I had to add a short plastic tube, similar to what the
pump-outs use, to make it fit the tapered pump-out fitting. Cost
was 24.59 CDN at Steveston Marine in Langley. They have a
website, too, and sell to the U.S.
http://www.stevestonmarine.com/< /A>
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Walter Klatt
Sent: Saturday, April 30, 2005 9:17 PM
To: rebel-builders@dcsol.com
Subject: RE: Float pump out cups on 1800's


Yeah, I thought 3/8 sounded kind of big for the rudders... You
might as well let us know that CT part number when you get a
chance. I'm still using those bungees on the rudders, but they
are probably overdue to be changed.

BTW, shouldn't you be sleeping...

Walter
they've been "probono" work on They cost especially Lake St. John the pain.... MAM cups but a piece of MAM would tomorrow of shop time, in boat. All in ------------------------------------------------------- https://www.dcsol.com/public/code/html-subscribe.htm ------------------------------------------------------- ------------------------------------------------------- ------------------------------------------------------- https://www.dcsol.com/login?mode=HTML ---------------------------------------------------------------
--





-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------






-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Walter Klatt

Float pump

Post by Walter Klatt » Sat Feb 18, 2012 10:28 am

Reposting in case the previous one didn't make it through...

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf
Of
Walter Klatt
Sent: Sunday, May 01, 2005 7:36 AM
To: rebel-builders@dcsol.com
Subject: Float pump


Wayne, I vaguely remembered posting about my pump years ago, so
did a search on the archives, and here it is.

Walter

From: WALTER.KLATT@HOME.COM Number: 6583 Private: No
To: MURPHY-REBEL Reference: None Reads: 60
Date: 8/22/2001 6:08 PM Received: No Exported
Subject: RE: Pump for Murphy 1800 pump-outs

Conference: Rebel Builders



I ended up buying a Beckson model 212PC pump, about 12 inches
long, very light, all plastic and can also be used to pump oil or
diesel. I had to add a short plastic tube, similar to what the
pump-outs use, to make it fit the tapered pump-out fitting. Cost
was 24.59 CDN at Steveston Marine in Langley. They have a
website, too, and sell to the U.S.
http://www.stevestonmarine.com/< /A>
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Walter Klatt
Sent: Saturday, April 30, 2005 9:17 PM
To: rebel-builders@dcsol.com
Subject: RE: Float pump out cups on 1800's


Yeah, I thought 3/8 sounded kind of big for the rudders... You
might as well let us know that CT part number when you get a
chance. I'm still using those bungees on the rudders, but they
are probably overdue to be changed.

BTW, shouldn't you be sleeping...

Walter
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Saturday, April 30, 2005 8:48 PM
To: rebel-builders@dcsol.com
Subject: Re: Float pump out cups on 1800's


I know the small bungee is for the water rudder (came
preinstalled as
well)...I throw those away immediately and install a
tension spring. Anyone
that is interested I can supply the CTC part # and how
many coils I cut off
to make it work right. Guess I should add that to the
"snag" list. Those
water rudder bungees don't make half a season before
rotting off.

What came with these and Dennis's prebuilts was 11' of
1/2" bungee cord just
like you get for the main gear on the Rebel. Guess
someone read cord and
threw in bungee instead of some small (rope) cord. I
grabbed some mower
starter cord today that should do the trick. If you
can get the make of the
pump I'll save myself some immediate work and give
these cups a whirl for
this season.

Thanks,
Wayne

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 30, 2005 11:39 PM
Subject: RE: Float pump out cups on 1800's

The small diameter bungee cord was supplied to
spring load the
water rudders. They should have supplied another
thin rope/thread
for the caps. I just did a loop with a knot, and
they've been
good the whole time for me. Like I said, I still
have yet to lose
a single one. I'll be down to my hangar tomorrow, so
hopefully
will remember to check my pump brand.

Walter
don't forget.
yet to lose a
"probono" work on
They cost
especially
Lake St. John
the pain....
MAM cups but
a piece of
MAM would
tomorrow of
shop time, in
boat. All in
-------------------------------------------------------
https://www.dcsol.com/public/code/html-subscribe.htm
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------


-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
---------------------------------------------------------------
--





-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------






-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”