throttle spacing

[Jones, Michael]

hi all

to quiet out there today, so i ask first question
what is spacing betweem throttle, carb heat, mixture, typical numbers

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rognal]

Mike,

I asked this question of the list awhile back. Here's the thread. Hope it
helps. I ended up using 2.5" spacing on my panel.

********

12/16/03
All,

Can anyone advise me what the accepted distance is between throttle and
mixture controls, center to center? I don't have access to an aircraft at the
moment to take a measurement so thought I would ask. I did not want to get
them so close together that operating one would interfere with the other, yet
I don't want to get them to far apart and waste panel space.

Thanks for the help,

Roger Hoffman #687R
Eugene, OR USA!

********

Hi Roger,

Just drilled the holes for the throttle and prop in out Moose panel a few
days ago. (M-14, no mixture) I recall we placed them on 2.5" centers. I will
verify tomorrow at the shop and re-email if different. We did a little mock
up and found the distance we thought ... not too close ... not too far.

Later,
Don B

********

Roger,
I tried a 2.75" spacing on a piece of wood and it felt awkward. Then I
measured a Cessna 172 and used that dimension. It is 2.5". The 2.5" seems to
be
perfect.
Good luck,
Rick D.


END





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[sa]

I used 3 inch centers between the throttle and my prop controls, seems
comfortable.

Scott

"Jones, Michael" <MJones@hatch.ca> wrote in message
news:05Mar7.120346est.332689@gateway.hatch.ca...

hi all

to quiet out there today, so i ask first question
what is spacing betweem throttle, carb heat, mixture, typical numbers

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------