Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Throttle Spring

Converted from Wildcat! database. (read only)
Locked
Ryan Mowat

Throttle Spring

Post by Ryan Mowat » Sat Feb 18, 2012 9:40 am

Just want to know what the popular opinion is for installing throttle
springs on engine the engine throttle - in the event that the throttle cable
were to relieve itself of its duty the spring would cause the engine to run
a full throttle rather than idle. I am thinking full throttle is easier to
deal with then idle?

Which is better - sring to full throttle or no spring and idle when cable
fails?



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ken

Throttle Spring

Post by Ken » Sat Feb 18, 2012 9:40 am

Mine is spring loaded open. If I had a mixture control, I'd make sure it
was the same - . There are lots of ways to shut off an engine but no
other way to open the throttle if the cable disconnects.

I guess it might be tougher to deal with quickly if it went to full
throttle on the ground but everything has tradeoffs.

Ken

Ryan Mowat wrote:
Just want to know what the popular opinion is for installing throttle
springs on engine the engine throttle - in the event that the throttle cable
were to relieve itself of its duty the spring would cause the engine to run
a full throttle rather than idle. I am thinking full throttle is easier to
deal with then idle?

Which is better - sring to full throttle or no spring and idle when cable
fails?




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

Throttle Spring

Post by Wayne G. O'Shea » Sat Feb 18, 2012 9:40 am

FULL THROTTLE ! you can always turn it on and off to control power. Idle is
useless for anything unless you're still taxing on the lake!

Wayne

----- Original Message -----
From: "Ryan Mowat" <rmowat@forge-industrial.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, November 05, 2004 10:29 AM
Subject: Throttle Spring

Just want to know what the popular opinion is for installing throttle
springs on engine the engine throttle - in the event that the throttle
cable
were to relieve itself of its duty the spring would cause the engine to
run
a full throttle rather than idle. I am thinking full throttle is easier
to
deal with then idle?

Which is better - sring to full throttle or no spring and idle when cable
fails?



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked