Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Moose exhaust assembly

Converted from Wildcat! database. (read only)
Locked
Ted Waltman

Moose exhaust assembly

Post by Ted Waltman » Sat Feb 18, 2012 9:19 am

I noticed today that my lower exhaust assembly came apart at a
hose-clamp joint. It will likely be no big deal to put it back
together, other than taking the cowl off. My question is whether one
should use some high-temp sealant where the two exhaust pipes join, or,
just put 'em back together and crank the hose-clamp down tighter...

Thanks,

Ted
142SR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Scott Aldrich

Moose exhaust assembly

Post by Scott Aldrich » Sat Feb 18, 2012 9:19 am

I have heard that these need to be checked now and then and can be the
source of "funny" sound as the exhaust rattles around. I haven't heard of
anyone putting any sealant in there but am not sure. Looks like they have
nut and a lock or jam nut on each one.

The engine guys (and gal) that used to lurk on here probably don't know
about the list address changing. If no one has already, I'm going to send
Jill & Carl, George and the Kimball's a quick note letting them know about
the change.

Can you reach it with just the cowl opened up or does it look like you'll
have to take the lower cowl off?

Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Ted
Waltman
Sent: Sunday, June 20, 2004 8:13 PM
To: rebel-builders@dcsol.com
Subject: Moose exhaust assembly

I noticed today that my lower exhaust assembly came apart at a
hose-clamp joint. It will likely be no big deal to put it back
together, other than taking the cowl off. My question is whether one
should use some high-temp sealant where the two exhaust pipes join, or,
just put 'em back together and crank the hose-clamp down tighter...

Thanks,

Ted
142SR




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ted Waltman

Moose exhaust assembly

Post by Ted Waltman » Sat Feb 18, 2012 9:19 am

I took the cowl off yesterday and found that the cylinder attach point
was cracked 7/8 through. I tried like heck to get the screw-on O-ring
(proper name?) off so I could take off the whole assembly to get it
fixed, but I couldn't break the seal. So, having run out of time, the
A&P in the same hangar offered to put some penetrating oil on it, let it
soak and try to get it off today for me.

I drilled two holes and put #10 SS screws in the other exhaust assembly;
one in the uppper portion of the hose-clamp and one in the lower where
the two halves mate...that way even if the hose-clamp loosens the
assembly cannot come apart. I'm going to do the same on the repaired
one later this week.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Scott Aldrich
Sent: Tuesday, June 22, 2004 12:28 PM
To: rebel-builders@dcsol.com
Subject: RE: Moose exhaust assembly


I have heard that these need to be checked now and then and can be the
source of "funny" sound as the exhaust rattles around. I haven't heard
of anyone putting any sealant in there but am not sure. Looks like they
have nut and a lock or jam nut on each one.

The engine guys (and gal) that used to lurk on here probably don't know
about the list address changing. If no one has already, I'm going to
send Jill & Carl, George and the Kimball's a quick note letting them
know about the change.

Can you reach it with just the cowl opened up or does it look like
you'll have to take the lower cowl off?

Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Ted Waltman
Sent: Sunday, June 20, 2004 8:13 PM
To: rebel-builders@dcsol.com
Subject: Moose exhaust assembly

I noticed today that my lower exhaust assembly came apart at a
hose-clamp joint. It will likely be no big deal to put it back
together, other than taking the cowl off. My question is whether one
should use some high-temp sealant where the two exhaust pipes join, or,
just put 'em back together and crank the hose-clamp down tighter...

Thanks,

Ted
142SR




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked