Sloshing Compound Identification

rebel · Post by **rebel** » Sat Feb 18, 2012 9:09 am

The stuff mam gets is from seal pac! Same as their proseal. part # cs 3600

On 4/12/2004 7:52 PM, OIFA@IRISHFIELD.ON.CA wrote to MURPHY-REBEL:

-> Received: by dcsol.com (Wildcat! SMTP Router v5.7.450.9b13)
-> for murphy-rebel@dcsol.com; Mon, 12 Apr 2004 16:48:08 -0800
-> Received: from ([207.164.81.3]) EHLO=frodo.csolve.net
-> by dcsol.com (Wildcat! SMTP v5.7.450.9b13) with SMTP
-> id 131652500; Mon, 12 Apr 2004 16:48:06 -0800
-> Received: from 207.35.14.29.hub5.csolve.net ([207.35.14.29]
helo=celeron266a)
-> by frodo.csolve.net with esmtp (Exim 4.24)
-> id 1BDC5h-000K3Q-QT
-> for murphy-rebel@dcsol.com; Mon, 12 Apr 2004 20:47:54 -0400
-> Message-ID: <001101c420f0$f19c51d0$e401910a@celeron266a>
-> From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
-> To: "Murphy Rebel Builders List" <murphy-rebel@dcsol.com>
-> Subject: Sloshing Compound Identification
-> Date: Mon, 12 Apr 2004 20:47:47 -0400
-> Organization: O'Shea's Irish Field Aviation
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; charset="iso-8859-1"
-> X-Orig-Content-Transfer-Encoding: 7bit
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 5.50.4522.1200
-> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200
-> X-Antivirus-Remover: Message was filtered through wsMailGuard (wsAV)
->
-> Not looking for a lecture...I know better than to use the stuff...but I
have
-> a guy asking about it to redo what someone else started.
->
-> Does anyone know who's sloshing compound is red?? Randolph's is yellow and
-> white.
->
-> I have found the red stuff in a few Rebel tanks, but don't know who the
-> manufacturer is...can someone help here?
->
-> THANKS!
-> Wayne
->

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 9:09 am

Not looking for a lecture...I know better than to use the stuff...but I have
a guy asking about it to redo what someone else started.

Does anyone know who's sloshing compound is red?? Randolph's is yellow and
white.

I have found the red stuff in a few Rebel tanks, but don't know who the
manufacturer is...can someone help here?

THANKS!
Wayne

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Legeorgen · Post by **Legeorgen** » Sat Feb 18, 2012 9:09 am

Wayne,

I've seen the red stuff too but don't know who makes it. Kreem is another
brand but it's white as well. I used Kreem in my Kitfox and had to remove the
wings after two years and clean it out.

I had been soaking pieces of aluminum that was covered in Randolph in a jar
of gas. These were pieces that were left over from the original Rebel kit
purchaser who used it to seal his leaks. I patched the tanks from the outside and
left the Randolph in the tank (I knew better) hoping it would stay as it had
not pealed off the pieces of aluminum I had been soaking in the jar after 18
months.

Well, the Randolph has since completely separated (three years later) from
the aluminum in the gas soaking jar and I am now waiting for the day it peels
off in a sheet from the wing tank and covers my finger screen. I keep a close
eye on the stuff but it's only a matter of time.

Tell the guy to do himself a favor and fix the tank the right way now and be
done with it. Sloshing the tank with a few gallons of MEK will clean it out.
It takes about two or three guys to flip the wing over several times before
emptying it and repeating the process until it runs out clear.

Bruce 357R

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Legeorgen · Post by **Legeorgen** » Sat Feb 18, 2012 9:09 am

sorry for the lecture, Wayne, but I couldn't help myself!

Bruce

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 9:09 am

Airplane is a Baking Deuce, so might just be a fuselage tank or similar...I
don't know for sure.

When you pour the MEK in to get rid of the sloshing compound, does it not
destroy the Proseal filets as well??

Wayne
----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Monday, April 12, 2004 10:00 PM
Subject: Re: Sloshing Compound Identification

Wayne,

I've seen the red stuff too but don't know who makes it. Kreem is another
brand but it's white as well. I used Kreem in my Kitfox and had to remove

the

wings after two years and clean it out.

I had been soaking pieces of aluminum that was covered in Randolph in a

jar

of gas. These were pieces that were left over from the original Rebel kit
purchaser who used it to seal his leaks. I patched the tanks from the

outside and

left the Randolph in the tank (I knew better) hoping it would stay as it

had

not pealed off the pieces of aluminum I had been soaking in the jar after

18

months.

Well, the Randolph has since completely separated (three years later) from
the aluminum in the gas soaking jar and I am now waiting for the day it

peels

off in a sheet from the wing tank and covers my finger screen. I keep a

close

eye on the stuff but it's only a matter of time.

Tell the guy to do himself a favor and fix the tank the right way now and

be

done with it. Sloshing the tank with a few gallons of MEK will clean it

out.

It takes about two or three guys to flip the wing over several times

before

emptying it and repeating the process until it runs out clear.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Legeorgen · Post by **Legeorgen** » Sat Feb 18, 2012 9:09 am

Wayne

The Kitfox had fiberglass tanks and the MEK wasn't in long enough to destroy
the glass but the Rebel and the Proseal would might be a problem. The tank
sealers dissolve quickly with the MEK but it might not be in long enough to
dissolve the proseal, completely...maybe

Bruce

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 9:09 am

"Maybe"s don't bother me when it's the Zetor tractor!!

)

Thanks,
Wayne

----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Tuesday, April 13, 2004 10:17 AM
Subject: Re: Sloshing Compound Identification

Wayne

The Kitfox had fiberglass tanks and the MEK wasn't in long enough to

destroy

the glass but the Rebel and the Proseal would might be a problem. The tank
sealers dissolve quickly with the MEK but it might not be in long enough

to

dissolve the proseal, completely...maybe

Bruce

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jerry Purdom · Post by **Jerry Purdom** » Sat Feb 18, 2012 9:09 am

Wayne:
Sealpak no.cs3600-mil-s-4383c is a red sloshing compound from Flamemaster
corp./chem seal div.
Ph. 316-942-6211

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <murphy-rebel@dcsol.com>
Sent: Monday, April 12, 2004 5:47 PM
Subject: Sloshing Compound Identification

Not looking for a lecture...I know better than to use the stuff...but I

have

a guy asking about it to redo what someone else started.

Does anyone know who's sloshing compound is red?? Randolph's is yellow and
white.

I have found the red stuff in a few Rebel tanks, but don't know who the
manufacturer is...can someone help here?

THANKS!
Wayne

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 9:09 am

THANKS! Jerry, I will pass that on to the gentleman in question. Wayne

----- Original Message -----
From: "Jerry Purdom" <jerrygoneflying@shaw.ca>
To: <murphy-rebel@dcsol.com>
Sent: Thursday, April 15, 2004 12:11 PM
Subject: Re: Sloshing Compound Identification

Wayne:
Sealpak no.cs3600-mil-s-4383c is a red sloshing compound from Flamemaster
corp./chem seal div.
Ph. 316-942-6211

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <murphy-rebel@dcsol.com>
Sent: Monday, April 12, 2004 5:47 PM
Subject: Sloshing Compound Identification

Not looking for a lecture...I know better than to use the stuff...but I
have
a guy asking about it to redo what someone else started.

Does anyone know who's sloshing compound is red?? Randolph's is yellow

and

white.

I have found the red stuff in a few Rebel tanks, but don't know who the
manufacturer is...can someone help here?

THANKS!
Wayne

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------