corner wraps had the channels the same on both sides,
which then required an additional one on the left side
to support the seat rail that was moved to the inside.
Sounds like the new instructions for the Rebel
eliminate that second channel by extending the corner
wrap inwards.
Walter
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Thursday, October 09, 2003 8:18 PM
To: murphy-rebel@dcsol.com
Subject: Re: Flaperon Control Roof Hanger on Rebel
By the way, Walter, thanks for info on the
seats. I think there may be
significant differences in design between
the Elite and Rebel in this area.
For sure, the sills are totally different.
somebody alluded to some
assymetry between the left and right sides,
but both are identical on the
Elite, other than for the aieron pushrod, of course.
----
*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
