The Murphy Builders Site

The Aircraft Spruce 1601-1410 rivet has a smaller diameter head. Should do just fine on inside such as floor. 1601-1414 same but longer grip length. Do a search for avex rivets and then narrow down to head diameter your looking for. Do you have a supplier named Fastenall? The correct rivets can be o...

Get yourself a good spring loaded centerpunch to drive the pin back. You may have to grind the shift so it's small enough to enter the mandrel hole and may have to push a couple of times to drive the piece of mandrel back. A 1/8" drill bit is a little smaller (.0035") than the #30 bit so you may wan...

Look under board index, rebel, modifications. Second last one you see, posted by dcromel

Take with many grains of salt.

I generally get a response from Murphy Air in about 2 days.
Try this address for Darryl Murphy [dmurphy@murphyair.com]
Works for me.

You might want to read the data sheet before you use this for your windshield.
http://www.bostik-us.com/sites/default/files/1100FS.pdf
Have a look at what it should not be ueed for in the section "typical applications".

I purchased ST-28 channel from Murphy last November.