The Murphy Builders Site

Thanks Steve.

Hi all,
Does anyone know what the factory are charging for Rebel and Radical kits these days? Or where I can find a price list?
Thanks and cheers
Mike

I believe the MAM droop tips fit Rebel, Elite, Moose and all. The same airfoil section is used for all. They will need trimming differently from model to model.
They work really well on our Rebel, so should be good for an Elite.
Cheers
Mike

Vans aircraft make a fibreglass one which is very popular.

Hi all,
Just to follow up. I asked B&C about this and they tell me this alternator has internal cooling fans and they don't recommend a blast tube...........One less job to do!
Cheers
Mike

Hi Curtis,
Thanks for the comment.
Cheers
Mike

Hi all,
We are about to upgrade our accessory case mounted alternator with a 40 amp B&C unit on our 0-320 Rebel. What are your thoughts on cooling it? Does it need a blast tube?
All comments appreciated.
Thanks, and Cheers from OZ.
Mike
Rebel 818

Looks good Gary. FWIW I did a similar thing with main and rear spar extensions on our Rebel......without spades of course.
Cheers
Mike

Best to all from Downunder. Hope 2020 is a good one for everyone.
Cheers
Mike

Thanks for your comments Rick, I appreciate it.
Cheers
Mike

Hi all, My Rebel has an 0-320 with a magneto and a Lightspeed Plasma 2 plus electronic ignition, which works very well. It came from the engine manufacturers with the electronic ignition coils mounted on a bracket attached to the upper joint between the crankcase halves within the chamber formed bet...

Hi Jerry,
I bought the thickest, strongest key rings I could find at the hardware shop which have done the trick. I had your problem until I found the right rings.
Cheers
Mike

It's all sounding pretty good Jerry. Thanks for keeping us in the loop.
Cheers
Mike

Well done Jerry. It looks great from Downunder!
Cheers
Mike

Good one Jerry, 818 had a couple of leaky rivets initially, both were tank rivets leaking in the centre so they must have split when being installed. One was near the filler neck and was fixed with a dob of proseal inside the tank accessed through the filler. The other was treated like Wayne does an...